| |
Music Noise Monitoring
| Music from pubs, clubs, discos and even restaurants
and hotels can cause problems for local residents and be at
dangerous levels for staff. The SoundEar Noise Warning Sign
is the perfect solution to keeping control of the noise and
monitoring the effectiveness of controls.
- Pub, club, disco, nightclub and restaurant noise monitoring
- Protect bar and club staff from dangerous noise levels
- Avoid noise complaints from residents
- Inform DJ or live band when the levels are too high
|
 |
The SoundEar Noise Warning Sign can be
set to light first the yellow and then the red lights when the noise
level is above the set limit. See the SoundEar
web page for more information on the sign itself.
One of the major problems of controlling noise levels in clubs
is that of human perception. If the music is to
somebody's taste it will not sound so annoying as to whom it is
not. On top of this, after just a short time being exposed to high
levels the ear becomes less sensitive so it is very difficult to
decide whether the level is too high without the use of a noise
level measuring device such as the SoundEar.
The SoundEar is mounted on the wall using a single screw and plugs
into the power using the adapter provided. It is very quick and
easy to install.
Evidence of Compliance - Data Logging
The SoundLog Noise Sign stores the average sound level every
five minutes, giving evidence of compliance (or non-compliance)
with limits set. If you need to see how the levels have been
in your absence then this is the ideal option.
The recordings can be downloaded to a computer using the
cable and software supplied.
Please see the SoundLog web page
for more information.
|
 |
DJ and Live Bands - Noise Control
The ultimate noise control can be acheived
by adding the SoundBuster (shown on the right) with either
the SoundEar or SoundLog Noise Warning Sign. The SoundBuster
connects to the sign and also plugs into the electricity supply.
A four-way extension cable is connected to the SoundBuster
and this provides power to the amplifier. When the noise level
is too high the power is removed from the extension.
The unit is reset by pressing a button on the front. The
trigger level is set in the usual way using the dial on the
back of the sign. |
 |
|
|
