dBadge Noise Dosemeter

Intro

Dosimeter

Using It

Software

I.S.

Kits

Specs

Noise Dosemeter

The dBadge, shown on the right, is the part that mounts on the worker's shoulder.

Strong rubber over-moulded case, light weight and protecting
Microphone and noise processor built in - no cables to snag
Integrated display and visible High Noise Exposure Alarm
Rechargeable NiMH battery
Memory for storing results
Intrinsically safe option

dBadge Noise Dosemeter

Lite

The dBadge Lite is the lowest cost option. It measures and stores the cumulative occupational noise parameters. It does not provide a Time History Noise Profile.

Kit order codes: CEL350LKx
Where x is the number of dosemeters

Standard

The Standard dBadge measures all necessary parameters but also has a Time History Profile, storing the average sound level every minute to provide a graph of level over time.

Kit order codes: CEL350Kx
Where x is the number of dosemeters

Plus

The dBadge Plus has all the features of the Standard version, but adds simultaneous measurement of "A" and "C" weighted Leq for checking the suitability of hearing protectors.

Kit order codes: CEL352Kx
Where x is the number of dosemeters

Noise Measurement Parameters

All dBadge versions measure all the parameters needed by the noise at work regulations.

L_Aeq average sound level
L_EP,d or L_EX,8hr daily noise exposure
L_CPeak for loud banging noise

The Standard and Plus versions also store the Leq and Peak every minute. The Plus version also stores the LAeq and LCeq so that the LCeq-LAeq figure can be used for selecting hearing protectors.

Display and Controls

The display shows the following information:

Measurement status and data
Ultra-bright LED high noise level alarm
"Fuel gauge" for memory available and battery level
1 minute values of average and peak sound levels

The dBadge has just two keys to control its simple operation.

The keys and the display can be locked to prevent tampering during measurement.

Charging the dBadge

dBadge dosemeters slot onto the charger, which can charge up to three units at the same time.

Fully charged in 90 minutes from flat
Multiple chargers can be linked together
Visual display of charge progress on "fuel gauge"

When on charge, the dBadge display shows the operating capacity of the battery in hours. It only takes 90 minutes for a full charge and a 30 minute charge us sufficient to give an operating time of 8 hours.

Kits with 1, 2, 3 and 5 dBadge Dosemeters include one 3-way charger. Kits with 10 dBadges include two 3-way chargers.

dBadge Charging Unit

Prices and Ordering

Standard kits are the most popular, with full data logging. Kits contain dBadges, Calibrator and Case.
Kits with 1, 2, 3 and 5 dBadges have one 3-way charger. Kits with 10 dBadges have two 3-way chargers.

Order Code	Description	Price	Purchase
CEL350K1	Noise Kit with 1 dBadge Dosimeter	£1572.00
CEL350K2	Noise Kit with 2 dBadge Dosimeters	£2195.00
CEL350K3	Noise Kit with 3 dBadge Dosimeters	£2832.00
CEL350K5	Noise Kit with 5 dBadge Dosimeters	£3882.00
CEL350K10	Noise Kit with 10 dBadge Dosimeters	£5877.00

ISC001	Insight Software for dBadge Noise Dosimeter	£295.00


Noise at Work	Environmental Noise	General Purpose	Signs and Controllers

	Home > Products > Noise at Work > dBadge		Tel. 0845 680 0312 info@noisemeters.co.uk


Home - Contact - News - Rental - Survey - Calibration - Resources - Search - Help General Purpose - Signs - Noise at Work - Environmental - Accessories - Mobile Site		Telephone 0845 680 0312 info@noisemeters.co.uk