May 2007 - Updated doseBadge Noise Dosemeter

The CR110A doseBadge Noise Dosemeter has had some new features added to make this already excellent noise dosemeter even more useful when assessing a worker's exposure to high noise levels to the European Noise at Work regulations.

New Features Fast Charger - full charge from flat in 2½ hours (faster if battery not flat) 100% Dose Exceeded Indicator 2-12 Year Warranty Dual Channel - measure OSHA, MSHA or AICHE at the same time as ISO 3dB More Intrinsically Safe (I.S.) approvals For overall product information, please visit the doseBadge Noise Dosemeter web pages.

Fast doseBadge Charger

The new CU110A doseBadge charger will charge a doseBadge from flat in 2½ hours . If the battery is not flat (usually the case) then it will charge in less time. You can also "top up" the charge in a much shorter time, giving the doseBadge a boost before setting it to work. This "top up" was not possible with the previous generation of doseBadge Noise Dosimeter charger.

100% Noise Dose Exceeded The doseBadge can be configured (using the Reader unit) to indicate as soon as the 100% Dose level is exceeded (e.g. 85 dBA for 8 hours) . The blue LED indicator on the doseBadge usually flashes once every second to show that the doseBadge is running. When 100% Dose is exceeded, the LED starts to flash twice every second.

2 - 12 Year Warranty

The doseBadge and its accessories now come with a 2 Year Warranty at no extra cost. This gives you confidence that your investment is not going to be lost due to product failures. It also shows our confidence that the product is extremely reliable. If you return the doseBadge to an approved Service Center each year for Calibration (required by many regulations) then this warranty is automatically extended by a further 10 years.

Dual Channel Noise Dosemeter

The existing doseBadge Noise Dosemeter could easily be configured to measure with different exchange rates, thresholds, criterion level and criterion time. However, it could only measure using one configuration at a time. The new doseBadge now has two channels. The second is set to make measurements with the common ISO 3dB - required by the European Noise at Work regulations. The first channel can be configured to have different settings, covering standards and regulations such as OSHA (5dB, Slow), MSHA and AICHE.

As well as storing the two channels mentioned above, the doseBadge also stores the C weighted Max Peak every minute, so you can assess the worker's exposure to loud banging noise too.

Intrinsically Safe - New Approvals

The CR110AIS Intrinsically Safe doseBadge now has additional approvals, including ATEX, EEx, IECEx, MSHA and SABS. For more information on the CR110AIS Intrinsically Safe, or I.S. doseBadge, and its use in hazardous and explosive atmospheres, please visit the Intrinsically Safe doseBadge web page.

More Information

For more detailed information, please visit the doseBadge Noise Dosimeter web pages.

<< News Stories

		Noise at Work		Environmental Noise		General Purpose		Signs and Controllers

Home - Contact - News - Training - Links - Resources - Search - Help
General Purpose - Signs - Noise at Work - Environmental - Accessories